NEW 15,000 SCFM ANGUIL Regenerative Thermal Oxidizer

NEW Anguil 15,000 SCFM Two-chamber Regenerative Thermal Oxidizer (RTO) is currently in storage. The unit has never been installed and is immediately available for purchase. 

The oxidizer will achieve 99% destruction efficiency, has structured ceramic media designed for 96%+ thermal energy recovery, has Supplemental Fuel Injection (SFI) to reduce operating cost,  Allen Bradley Allen-Bradley CompactLogix PLC, and is fabricated to both USA and Canadian gas code standards.  The oxidizer could be applied to a variety of applications or processes.  

15,000 SCFM Regenerative Thermal Oxidizer

Two-chamber RTO, Forced Draft Configuration. Capable of 95%+ thermal energy recovery and destruction efficiency, this unit is immediately available for purchase and could be applied on a variety of applications or processes. Manufactured in 2001.

35,000 SCFM Regenerative Thermal Oxidizer

Two-chamber RTO, Induced Draft Configuration. Capable of 95%+ thermal energy recovery and destruction efficiency, this unit is immediately available for purchase and could be applied on a variety of applications or processes.

35,000 SCFM Regenerative Thermal Oxidizer

This RTO is approximately 10 years old and capable of handling airflows from 10,000 to 35,000 SCFM with 95% heat recovery. It is immediately available for purchase and could be applied on a variety of applications or processes.

60,000 SCFM Regenerative Thermal Oxidizer

Manufactured and installed in 2004, this 60,000 SCFM Regenerative Thermal Oxidizer was only utilized for two years on a foundry emission control application. It is immediately available for purchase and could be applied on a variety of applications or processes.

Stainless Steel Regenerative Thermal Oxidizers

These two stainless-steel, Regenerative Thermal Oxidizers are currently in storage, have never been installed and would be ideal for corrosive airstream applications. Immediately available for purchase at a reduced price.

500 SCFM Direct Fired Thermal Oxidizer

This brand new Thermal Oxidizer manufactured with a corrosion resistant coating for inorganic acids, it is designed for inert air streams and requires no additional fuel for destruction. A NEMA 3R panel enclosure is included and skid mounted. The system was never installed, is currently in storage and immediately available for rental or purchase.

250 SCFM Electric Catalytic oxidizer

Includes 50% effective plate type heat exchanger, 30 kW heater with SCR (silicone control rectifier) and Allen Bradley Micrologixs 1200 PLC. Immediately available for rental or purchase.

500 SCFM Electric Catalytic Oxidizer

Oxidizer includes monolith catalyst and 50% effective stainless steel, plate heat exchanger. Heater is 60 KW at 460v/3ph/60hz and includes a silicone control rectifier (SER). Immediately available for rental of purchase.

500 SCFM Catalytic Oxidizer

Oxidizer includes monolith catalyst and stainless steel shell and tube heat exchanger for 50% thermal efficiency. Immediately available for rental or purchase.

500 SCFM Chlorinated Catalytic Oxidizer with a Scrubber

Manufactured in 1997, this entire system is mounted on a trailer and immediately available for purchase or rental.

500 SCFM Dual Therm-Cat

500 SCFM Thermal/Catalytic Oxidizer. Immediately available for rental or purchase.

750 SCFM Dual Therm-Cat

750 SCFM Thermal/Catalytic Oxidizer. Immediately available for rental or purchase.

750 SCFM Catalytic Oxidizer (2)

We currently have two 750 SCFM catalytic oxidizers. They include monolith catalyst and stainless steel, shell and tube heat exchangers for 50%+ thermal efficiency. Immediately available for rental or purchase.

1,000 SCFM Catalytic Oxidizer

This refurbished Remidi-Cat is designed for 1,000 SCFM, can process up to 28 lbs/hr of BTEX with a 95%+ Destruction Rate Efficiency and able to operate on propane or natural gas. The oxidizer has 50% effective stainless-steel heat exchanger, chart recorder, Allen Bradles controls with large display and comes with catalyst. The system is immediately available for rental or purchase and is thoroughly factory tested prior to shipment.

1,500 SCFM Chlorinated Catalytic Oxidizer

System designed to process chlorinated organics. Includes 316 SS internals and shell & tube heat exchanger. Immediately available for rental or purchase.

2,000 SCFM Catalytic Oxidizer

Oxidizer includes stainless steel shell and tube heat exchanger for 50% thermal efficiency. Immediately available for rental or purchase.

7,500 Catalytic Oxidizer

System includes PLC based controls, a stainless steel shell & tube heat exchanger providing 65% thermal efficiency and monolith catalyst. Immediately available for rental or purchase.

9,000 SCFM Catalytic Oxidizer

Manufactured in 1993, this Model 90-Anguil Catalytic oxidizer has a stainless steel heat exchanger and is immediately available for purchase.

15,000 SCFM Catalytic Oxidizer

System includes PLC based controls, pelletized catalyst and new heat exchanger. Unit previously in operation at flexographic printing plant but could be applied on a variety of applications and processes. Immediately available for rental or purchase.

10,000 SCFM Zeolite Rotor Concentrator Wheel

Concentrator immediately available for integration into new or existing oxidizer system. The wheel includes hydrophobic zeolite absorbent impregnated on a honeycomb substrate disc rotor and is capable of 10:1 - 15:1 concentration ratios. Manufactured in 2000. Immediately available for rental or purchase.

55,000 SCFM Dual-Concentrator Wheel System

Dual wheel system in pristine condition.

2,500 SCFM Acid Gas Scrubber System

Packed scrubber system includes hastelloy quench, conductivity and ph controls. It\'s designed for 99% removal of hydrochloric acid and is immediately available for rental or purchase.

500 SCFM Ceramic Filter / Catalyst

A Four (4) section Anguil Self Cleaning Ceramic Filter (SCCF) Assembly will be provided upstream of the RTO. Each section will be designed to handle 10,000 SCFM. Normal operation will consist of 3 sections on line (processing 30,000 SCFM) with one section in cleaning mode. When a particular section is in cleaning mode an additional 1,500 SCFM of fresh combustion air will be provided through the cleaning burner for that section.